Skip navigation

(and similar audio recorders)

For casual professional recording of everyday sounds, ranging from nature to interviews, the Zoom H1 is a very convenient and inexpensive device. With outdoor recording, wind is almost always present in places like Ireland. If you use a H1 as it is, your recordings will rumble with every puff of wind and destroy your recording.
To remedy this, I initially bought a simple foam windshield and this was sufficient on calm days. But for the normal gusts of westerly winds we get in Ireland, the design had to be improved. Rycote are making Mini Windjammers that cost around £STG25.  As I know how windjammers work, I found the cost excessive and the Rycote design perhaps not the optimal solution.
Fluffy textile
I bought some nice fluffy/hairy textile in a local shop (Hickey’s). The criteria for the material was that the base material should be as transparent as possible and the outer coating as hairy as possible. As this was shortly after St Patrick’s day, I bought 2 meters of a green fluffy material for 5 euro (which is enough for perhaps 20 windjammers).
Wire cage
Next, I made a small cage from brass-wire, to contain the H1. You can use any kind of semi-rigid wire for this.

After shaping the wire-cage, I folded some fluffy textile around it with the inside out and marked where to cut the textile.

Fluffy textile sticthed together, and Velcro

I sewed the front of the textile in a curve to fit the front of the wire-cage, and along the bottom I stitched on some Velcro, which makes it easy to put the textile on on the cage and to get, for example, a headphone cable through.

Elastic cage
Finally, I used some elastic band to hang the Zoom H1 in the cage, to prevent handling noise and other unwanted vibrations to be picked up, and inserted the cage with the H1 into the green fluffy tube. Zip up the Velcro and you’re ready for recording.

Zoom H1 and Windjammer

Finished H1 Windjammer

Happy Recording!

One Comment

  1. Love this 🙂 I have never seen a green ‘deadcat’ before 😀 Looks good and does the job! 🙂 🙂


One Trackback/Pingback

  1. […] the rumbling from wind hitting the microphone. If you get some nice fluffy textile (see my note DIY Wind-jammer for Zoom H1), you can use a similar, but even simpler approach. Cut a piece of the fluffy textile about 2 […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: